Mylar to CAD Conversion

If your organization has old Mylar drawings, and you’re thinking about converting them to CAD, you’ve come to the right place. (Mylar is a trade name for BOPET (biaxially-oriented polyethylene terephthalate) polyester film, which has been widely used by engineering designers in their work.) Mylar was a favored media because schematics that are printed on Mylar reflect the depth and dimension of the finished project more easily than blueprints or paper drawings.With today’s newer 3D CAD technologies, Mylar film has mostly been replaced by 3D CAD models and dynamic virtual viewing. This can lead to a dilemma for organizations that have large stores of Mylar drawings. Mylar has some inherent stability problems that may affect the long-term accuracy of older drawings.Because Mylar is basically a plastic sheeting material it can be affected over the years by changes in temperature, causing older drawings to have stretched or otherwise changed in size, affecting the accuracy of the drawing itself. So, the question becomes: If you have legacy Mylar drawings that need to be converted to CAD, how can you ensure quality control in the process?The accuracy of the final CAD file can be of paramount importance, especially in manufacturing and aerospace applications, where micro-tolerances can be critical. Furthermore, these are the very industries that are most likely to have large archives of Mylar drawings that are still in use, due to the long-life of manufacturing equipment and aircraft.The questions that arise in nearly every one of these organizations are: Does it make sense to convert the Mylars to CAD? And, can we ensure the accuracy if we do? So, it boils down to two separate issues, the cost of the CAD conversion, weighed against the potential inaccuracies in the final product.

Our Mylar Conversion Process

What does it take to succeed in the accurate conversion of un-dimensioned aerospace Mylar drawings to 3D CAD? Our process includes the following steps:

• Technical Review of Mylar Drawings
• Pre-Scan Clean-up of Mylar Drawings
• Scanning Mylars with Large Format Technical Scanner
• Enhance Scanned Image
• Check for Quality Control of Scanned Image
• Convert to 3D
• Final QC check ensures that the file meets stringent standards for CAD Perfect^® Conversion.

Cost of Converting Mylars

Many organizations assume that the cost associated with the conversion of Mylars must be quite high because of the accuracy requirements. Because we specialize in high accuracy Mylar conversions, we have processes and people in place to ensure quality control with affordable prices. By ensuring specified control, intelligent job management, defined processes, reliable performance, and integrity of data and records maintenance, we maintain tight cost controls, with the savings, passed on to our customers.